Calibration is the process of aligning measuring or control and measurement equipment with standards or reference standards. The purpose of calibration is to ensure that measuring or control and measuring devices are able to accurately and precisely measure or control values as required by technical specifications. Calibration can be performed on various types of equipment, …
Resonance of machines and structures – That is, how to perform the BUMP TEST without turning off the machine, with the support of negative averaging…. Taking hundreds of measurements, in various industrial plants, it is not uncommon to encounter high levels of vibration, associated with the phenomenon of resonance. This seemingly well-known phenomenon has repeatedly …
Machine diagnostics and proper operation are the most important requirements for industrial machinery to ensure smooth production processes. Frequent damage to small components results in significant losses due to unplanned stops in the production process. Diagnostics of machines and equipment and monitoring of their operating parameters will undoubtedly allow to avoid failures, plan maintenance and …
Advanced 4, 8, 12 or 16 channel pocket vibration analyzer and DAQ acquisition card up to 196 kHz sampling, for less than you think. You’ve met many times with advanced DAQ-type data acquisition cards, capable of acquiring signals from 4 to 16 accelerometers, microphones, force sensors and other sources, at high sampling rates and synchronously. …
There are many devices available on the market for vibration diagnostics of rolling bearings. During the operation of rotating machinery, rotating bearing components generate vibrations over a wide range of frequencies. The level of vibration increases if the bearing is not properly lubricated, is overloaded or is damaged. Devices with which we can quickly measure …
Tools for vibration diagnosis of rolling bearings Read More »
Bearings are the most susceptible part to mechanical failure that can be found in any device. This is affected by poor lubrication, lack of concentricity, lack of proper balancing of the parts, and vibrations present during the operation of the device. Naturally, vibrations will be compounded by each of the above factors, so they will …
Ongoing vibration diagnostics, that is, the use of portable and permanent monitoring Read More »
Modal analysis, is a measurement technique used in engineering and physics to study the dynamic behavior of structures, structures and machines. It involves analyzing the natural frequencies, modal forms and damping coefficients of a given system to understand its response to external forces or disturbances. What is modal analysis? The basic idea behind modal analysis …
Predictive Maintenance is a technique that uses tools and methods to monitor the condition of a machine, during operation. The recorded data allows the engineer to predict the future failure of the monitored equipment, allowing it to be repaired or replaced, just before failure. What is the difference between predictive maintenance and preventive maintenance? Preventive …
PREVENTIVE MAINTENANCE VS. PREDICTIVE MAINTENANCE Read More »
Vibration analysis is an effective means of detecting problems in machines. The consequences of malfunctions in production plants are downtime, loss of raw materials as well as dangerous work accidents and negative ecological effects. Therefore, malfunctions must be prevented, and when they occur, a quick response is needed to solve the problem. Does vibration measurement …
Vibration measurement and analysis in maintenance – what you need to know Read More »
Digital technologies have advanced significantly over the past few years. Actually, that’s a small understatement, as we are witnessing developments that were not even imaginable fifty years earlier. Digital cameras are now so accurate that they could even be adapted to the mechanical industry as machine monitoring systems. How do they work? That is what …
